Salt Bath 709 Specifications
Chamber Dimensions 7" Wide x 7" Long x 9" Deep - 0.26 Cubic Feet
(17.8cm Wide x 17.8cm Long x 22.9cm Deep - 7.4L)
Maximum Temperature 2000F (1093C)
Electrical 120 Volts, 18 Amps, 2160 Watts, 60Hz, Single Phase
Power Cord Plug Configuration - NEMA 5-20
Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
Model will operate properly on both 50Hz and 60Hz
Model not available in 3 phase Delta or Y designs
Salt Pot Suggestion Will accept salt pots up to 5.5" OD. Thinner, schedule 40 316 Stainless Steel is preferred.
Salt pot depth should be close to 13". Does not include Salt Pot.
Salt pot must be grounded. See manual for details.
Shipping Weight 60 lb (27.3 Kg) approx.
Shipping Method: Freight Truck
Salt Bath models may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
-01.jpg)
