This is the new Jen-Ken Vertical Air Bath 30 Plus 9! It is a modified Vertical Air Bath 30 with a detachable 9" extension and a 50 amp cord. The Vertical Air Bath 30 Plus 9 draws approximately 33 Amps of power and a 50 amp breaker is recommended. Without the 9" extension it operates just like a Vertical Air Bath 30 and draws approximately 26 Amps of power.
FREE SHIPPING! (Additional charge for Alaska and Hawaii)
"I personally own and use a Jen-Ken Air Bath 30 Plus 9 in my shop. It heats up from room temperature to 1500F in 31 minutes. I highly recommend the Vertical Air Bath heat treating ovens."
Robert, Iron Dungeon Forge
Jen-Ken Kilns are delivered with pre-loaded heat treating programs for 1084, 1095, 52100, 5160 and 440C plus the following temperatures.
Jen-Ken temperatures programmed with Air Baths in Fahrenheit.
Austenitizing temperatures (10-minute hold) This is the temperature before you quench.
1425
1450
1475
1490
1500
1525
1550
1580
Stress Relief (sub-critical anneal) no hold time
1275
Normalizing (5-minute hold)
1400
1425
1450
1475
1575
1600
1625
The Patent-Pending Jen-Ken Vertical Air Bath 39 is a much deeper version that allows blades up to 32” long with tangs up to 6” long. The blade smith may need a platform to stand on to retrieve the blade vertically from in order to transfer to the quenching solution of their choice.
Stand w/ casters included
Detailed Information:
| Inside Width | 11 |
| Depth | 30 to 39 |
| Top / Side Firing | Side |
| Volts | 240v |
| Amps | 26A to 33A |
| Watts | 6240W |
| Plug |
|
| Max Temp | 2200F |
| Cubic Feet | 2.10 cuft |
| Weight | |
| Shipping Weight |
|
Controller Descriptions:AF4C: 3-KeyThe AF4C is a variable PID controller, that is simple and easy to use. It includes multiple software configurations that are specialized for a variety of applications. This 3-button system allows you to use one of 4 preset firing schedules and has an additional 4 slots that allow the operator to program and save customized firing schedules for multiple step kiln firings. Each program can contain up to 8 heating or cooling rates, 8 target temperatures and 8 hold periods.
Autofire
The AutoFire®4000 controller is a variable PID temperature controller for any electric kiln application, that includes many standard features, a user-friendly 12-key keypad and robust temperature control software. The controller allows the operator to create, program and save 9 separate firing schedules with 10 or more user defined heating and cooling rates, target temperatures and hold times. Many kiln operators prefer the AutoFire®3000 because of its versatility and proven reliability. Robust electronics and a four-layer circuit board design make the controller immune to electrical noise and able to perform in industrial environments.
SLIDE
The SLIDE controller has the same features that the Autofire (12 Key controller) has but it's a 'touch screen'!
The SLIDE controller is a variable PID temperature controller for any electric kiln application, that includes many standard features, a user-friendly 'touch screen' and robust temperature control software. The controller allows the operator to create, program and save 9 separate firing schedules with 10 or more user defined heating and cooling rates, target temperatures and hold times. Many kiln operators prefer the SLIDE because of its versatility and proven reliability. Robust electronics and a four-layer circuit board design make the controller immune to electrical noise and able to perform in industrial environments.
TAP – Touch Screen Kiln ControlThe Temperature Automation by Proportional Integral-Derivative (TAP) controller is the first commercially available kiln controller that utilizes a Graphical User Interface (GUI). It has an intuitive touch screen that allows the user start to finish control of a firing process. It includes features such as diagnostics and Preventative Maintenance Alerts that keep the user informed about the status and remaining life expectancy of critical kiln components (relays, thermocouples, and heating elements).
FREE SHIPPING TO CONTINENTAL U.S. ONLY!
-01.jpg)
