Get a $100 discount when you add an Air Bath 16 to your cart!
I personally own and use a Jen-Ken Air Bath 30 Plus 9 in my shop. It heats up from room temperature to 1500F in 31 minutes. I highly recommend the Vertical Air Bath heat treating ovens.
Robert, Iron Dungeon Forge
Jen-Ken Kilns are delivered with pre-loaded heat treating programs for 1084, 1095, 52100, 5160 and 440C plus the following temperatures.
Jen-Ken temperatures programmed with Air Baths in Fahrenheit.
Austenitizing temperatures (10-minute hold) This is the temperature before you quench.
1425
1450
1475
1490
1500
1525
1550
1580
Stress Relief (sub-critical anneal) no hold time
1275
Normalizing (5-minute hold)
1400
1425
1450
1475
1575
1600
1625
The Patent-Pending Jen-Ken Vertical Air Bath 16 allows your shorter blades to destress (normalize), harden. And temper with little to no warping or distortion in the kiln. This kiln size is good for up to 9” blades with tangs no longer than 6”.
Stand w/ casters included.
Detailed Information:
| Inside Width | 11 |
| Depth | 16 |
| Top / Side Firing | Side |
| Volts | 240v |
| Amps | 15A |
| Watts | 3600W |
| Plug | 6-20 |
| Max Temp | 2200F |
| Cubic Feet | 1.12 cuft |
| Weight | 15A |
| Shipping Weight | 100 lbs. |
Controller Descriptions:
AF3P: 3-KeyThe AF3P is a variable PID controller, that is simple and easy to use. It includes multiple software configurations that are specialized for a variety of applications. This 3-button system allows you to use one of 4 preset firing schedules and has an additional 4 slots that allow the operator to program and save customized firing schedules for multiple step kiln firings. Each program can contain up to 8 heating or cooling rates, 8 target temperatures and 8 hold periods.
Autofire
The AutoFire®4000 controller is a variable PID temperature controller for any electric kiln application, that includes many standard features, a user-friendly 12-key keypad and robust temperature control software. The controller allows the operator to create, program and save 9 separate firing schedules with 10 or more user defined heating and cooling rates, target temperatures and hold times. Many kiln operators prefer the AutoFire®3000 because of its versatility and proven reliability. Robust electronics and a four-layer circuit board design make the controller immune to electrical noise and able to perform in industrial environments.
TAP – Touch Screen Kiln ControlThe Temperature Automation by Proportional Integral-Derivative (TAP) controller is the first commercially available kiln controller that utilizes a Graphical User Interface (GUI). It has an intuitive touch screen that allows the user start to finish control of a firing process. It includes features such as diagnostics and Preventative Maintenance Alerts that keep the user informed about the status and remaining life expectancy of critical kiln components (relays, thermocouples, and heating elements).
Free Shipping to continental U.S. Only.
-01.jpg)
