Get a $100 discount when you add an Excalibur to your cart!
FREE SHIPPING! (Additional charge for Canada, Alaska and Hawaii)
I personally own and use a Jen-Ken Air Bath 30 plus 9 in my shop. It heats up from room temperature to 1500F in 31 minutes. I highly recommend the Vertical Air Bath heat treating ovens.
Robert, Iron Dungeon Forge
Jen-Ken Kilns are delivered with pre-loaded heat treating programs for 1084, 1095, 52100, 5160 and 440C plus the following temperatures.
Jen-Ken temperatures programmed with Air Baths in Fahrenheit.
Austenitizing temperatures (10-minute hold) This is the temperature before you quench.
1425
1450
1475
1490
1500
1525
1550
1580
Stress Relief (sub-critical anneal) no hold time
1275
Normalizing (5-minute hold)
1400
1425
1450
1475
1575
1600
1625
The Patent Pending Excalibur Vertical Air Bath from Jen-Ken Kilns.
It is a Custom Vertical Airbath 21 with the Ability to Heat Treat Blades in the shorter version and swords when the removable Excalibur section is clamped in. This add-in elemented heating section will extend the height to make the oven 50 inches deep. The workspace needed to use this oven with the add-inExcalibur section in place will require tall ceilings, a tall vertical quench tank and a platform for the bladesmith to stand on to retrieve the blades to transfer them to their quench medium of choice. Includes a low profile welded stand on casters Shown with a 12 Button controller and the optional Solid State relays. (Platform and quench tank not included)
Detailed Information:
Inside Width | 11 |
Depth | 50 |
Top / Side Firing | Side |
Volts | 240v |
Amps | 22A or 40A |
Watts | 5280w or 9600w |
Plug | 6-50 |
Max Temp | 2200F |
Cubic Feet | |
Weight | |
Shipping Weight
Controller Descriptions:
12 Key Autofire The AutoFire®4000 controller is a variable PID temperature controller for any electric kiln application, that includes many standard features, a user-friendly 12-key keypad and robust temperature control software. The controller allows the operator to create, program and save 9 separate firing schedules with 10 or more user defined heating and cooling rates, target temperatures and hold times. Many kiln operators prefer the AutoFire®3000 because of its versatility and proven reliability. Robust electronics and a four-layer circuit board design make the controller immune to electrical noise and able to perform in industrial environments.
SLIDE The SLIDE controller has the same features that the Autofire (12 Key controller) has but it's a 'touch screen'! The SLIDE controller is a variable PID temperature controller for any electric kiln application, that includes many standard features, a user-friendly 'touch screen' and robust temperature control software. The controller allows the operator to create, program and save 9 separate firing schedules with 10 or more user defined heating and cooling rates, target temperatures and hold times. Many kiln operators prefer the SLIDE because of its versatility and proven reliability. Robust electronics and a four-layer circuit board design make the controller immune to electrical noise and able to perform in industrial environments.
TAP – Touch Screen Kiln ControlThe Temperature Automation by Proportional Integral-Derivative (TAP) controller is the first commercially available kiln controller that utilizes a Graphical User Interface (GUI). It has an intuitive touch screen that allows the user start to finish control of a firing process. It includes features such as diagnostics and Preventative Maintenance Alerts that keep the user informed about the status and remaining life expectancy of critical kiln components (relays, thermocouples, and heating elements).
FREE SHIPPING TO CONTINENTAL U.S. ONLY!
|