The KO Series of heat treat ovens are designed with a thicker firebrick structure and a maximum temperature of 2400°F. This extra insulation and headroom offers more speed and more power per cubic foot for high mass loads.
The KO Series heat treat ovens feature side opening doors that don't subject you to the added heat of a drop-down door. They also feature a forward facing door latch that remains cool and is within easy grasp.
The KO's are available in a variety of control choice options as well as the solid state output option (which you want).
See below for available models and check out the Features tab for in-depth details on all KO Series features.
The KO 18 is our most popular KO Series heat treat oven. It's depth is about right for most knife makers and machinists.
18" Deep x 9" Wide x 5.5" High
240V, 13A, 3120W
2400°F Maximum Temperature
Chamber Dimensions: 18" Deep x 9" Wide x 5.5" High - 0.52 Cubic Feet
(45.7cm Deep x 22.9cm Wide x 14cm High - 14.7L)
Outer Dimensions: 23.5" Deep x 20" Wide x 19.5" High (includes the 8" stand)
(59.7cm Deep x 50.8cm Wide x 49.5cm High)
Maximum Temperature: 2400F (1316C)
Electrical: 240 Volts, 13 Amps, 3120 Watts, 60Hz, Single Phase
Power Cord Plug Configuration - NEMA 6-20
Consult with an electrician for proper fuse panel, service wire size, receptacle, and fusing requirements. This model, used for its intended and expected purpose, would not be defined as "continuous use". Continuous use is defined as continuous, full power on for 3+ hours.
Model is available in 200V, 208V, 220V and 230V
Model will operate properly on both 50Hz and 60Hz
?Model not available in 3 phase Delta or Y designs
Shipping Weight: 102lb (46.4Kg) Approx.
Shipping Method: Freight Truck
NRTL Agency Listing TUV Listed United States and Canada - Designed and Tested to CSA & U/L 499
KO models may contain chemicals known to the State of Calfornia to cause cancer and birth defects or other reproductive harm.
-01.jpg)
